новости компании о How to use the CM Multifunction Electrical Counter Meter?

Using the CM multifunction counter is simple and efficient for applications such as counting, timing, and output control. Here’s how:

1. Wiring Setup: Connect sensors, relays, or signal inputs to the CP1/CP2 terminals, and output devices to AL1/AL2. The meter supports both high-level (3–30VDC) and low-level (0–2VDC) input signals.

2. Mode Setting: Use dial switches or front-panel buttons to configure the input mode (A/B/C/D) and output mode (F, N, C, R, etc.). No programming is required.

3. Counting/Timing Selection: You can switch between counting mode and timing mode through internal settings or switch selection.

4. Start Operation: Once powered on, the meter will start counting or timing based on input pulses and execute output control (e.g., relay drive or alarm).

5. Power-Fail Memory: Built-in memory stores data up to 10 years in case of power failure.